Order Products : sales@su-jiao.com
Cosmic DAP D33/6120
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Cosmic Plastics, Inc. |
| Trademark: | Cosmic DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qe0DtZ_Cosmic-DAP-D33-6120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DESCRIPTION Cosmic D33 / 6120 is a short glass fiber filled, general purpose diallyl ortho phthalate molding compound which is supplied in a free flowing granular form. It can be easily molded in compression, transfer, or injection equipment and can be readily preformed. FEATURES D33 / 6120 has a low water absorption, high dielectric strength, and low dissipation factor along with a fast cure. APPLICATIONS Switches, terminals, insulators, cups, cases and other applications requiring strength. Also useful for encapsulation of electrical and electronic components. Has easy flow and is useful for molding thin parts. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.72 | g/cm³ | |
| Bulk Factor | 2.5 | ||
| Molding Shrinkage - Flow | 0.10 to 0.40 | % | |
| Dimensional Stability | < 0.010 | % | |
| Water Absorption 1(Equilibrium, 50°C) | 0.25 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 41.4 to 68.9 | MPa | |
| Flexural Strength | 89.6 to 103 | MPa | |
| Compressive Strength | 165 to 179 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 27 to 64 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow (-40 to 100°C) | 1.2E-5 | cm/cm/°C | |
| Heat Distortion | 260 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Dielectric Breakdown | |||
| Dry | 62000 | V | |
| Wet | 60000 | V | |
| Surface Resistivity | |||
| -- 2 | 1.0E+10 | ohms | |
| -- 3 | > 1.0E+16 | ohms | |
| Volume Resistivity | |||
| -- 4 | 1.0E+10 | ohms·cm | |
| -- 5 | > 1.0E+16 | ohms·cm | |
| Dielectric Strength 6 | |||
| Dry | 15 | kV/mm | |
| Wet | 13 | kV/mm | |
| Dielectric Constant | |||
| 1 kHz 7 | 4.30 | ||
| 1 kHz 8 | 4.20 | ||
| 1 MHz 9 | 4.20 | ||
| 1 MHz 10 | 4.00 | ||
| Dissipation Factor | |||
| 1 kHz 11 | 0.011 | ||
| 1 kHz 12 | 7.0E-3 | ||
| 1 MHz 13 | 0.015 | ||
| 1 MHz 14 | 0.013 | ||
| Arc Resistance | 145 | sec |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 135 to 190 | °C | |
| Injection Pressure | 3.45 to 55.2 | MPa |
| Note Message | |
|---|---|
| 1 . | 48 hrs |
| 2 . | 30 days @ 100% RH @ 70°C |
| 3 . | As Is |
| 4 . | 30 days @ 100% RH @ 70°C |
| 5 . | As Is |
| 6 . | Method B (Step-by-Step) |
| 7 . | Wet |
| 8 . | Dry |
| 9 . | Wet |
| 10 . | Dry |
| 11 . | Wet |
| 12 . | Dry |
| 13 . | Wet |
| 14 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TOTAL Polyethylene LDPE 1070 MN 18 C | TOTAL Refining & Chemicals | LDPE | TOTAL Polyethylene |
| Bergamid™ A700 blue VN4817CF | PolyOne Corporation | Nylon 66 | Bergamid™ |
| MAJORIS DG454X | AD majoris | PP, Unspecified | MAJORIS |
| Sylvin 8205-75UV Brown 7445 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Dow Corning® C6-570 | Dow Corning Corporation | Silicone | Dow Corning® |
