Order Products : sales@su-jiao.com
PLUSTEK PD300G5
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Polyram Ram-On Industries |
| Trademark: | PLUSTEK |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QdYXGh_PLUSTEK-PD300G5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 25% GLASS-FIBER REINFORCED POLYAMIDE 12,HEAT STABILIZED AND HYDROLYSIS RESISTANCE FOR INJECTION MOULDING APPLICATIONS. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792, ISO 1183 |
| Water Absorption | |||
| Saturation | 1.4 | % | ASTM D570 |
| Saturated, 23°C | 1.4 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7000 | MPa | ASTM D638, ISO 527-2 |
| Tensile Strength (Yield) | 100 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation | |||
| Fracture | 3.5 | % | ASTM D638 |
| Fracture | 3.0 | % | ISO 527-2 |
| Flexural Modulus | 5000 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | 150 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 90 | J/m | ASTM D256 |
| 23°C | 10 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 177 | °C | ASTM D648, ISO 75-2/B |
| 1.8 MPa, not annealed | 163 | °C | ASTM D648, ISO 75-2/A |
| Melting Temperature | 175 | °C | ISO 11357-3, ASTM D3418 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 215 - 255 | °C | |
| Middle Temperature | 220 - 260 | °C | |
| Front Temperature | 225 - 265 | °C | |
| Mold Temperature | 65.0 - 105 | °C | |
| Injection Pressure | 70.0 - 105 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 35.0 - 70.0 | MPa | |
| Back Pressure | 0.350 - 0.700 | MPa | |
| Screw Speed | 60 - 90 | rpm |
| Injection instructions |
|---|
| Fill Speed: 50 to 75 mm/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miramid® SE35C | BASF Leuna GmbH | Nylon 66 | Miramid® |
| Xuchuan XCW-6102H | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Cheng Yu LD3010 Light Dispersive | Cheng Yu Plastic Company Limited | PC | Cheng Yu |
| InnoPlus LD2420K | PTT Global Chemical Public Company Limited | LDPE | InnoPlus |
| Karina ORANGE COLOR CONCENTRATE 32/1-FC | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
