Order Products : sales@su-jiao.com

Exelene® PS 6800

Category:	PS (GPPS) , General Purpose Polystyrene
Manufacturer:	Montachem International, Inc.
Trademark:	Exelene® PS
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Qbzw35_Exelene-PS-6800.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Applications:

Cutlery, Coextrusion Capping, Medical Applications

Characteristics:

The Exelene resin GPPS 6800 meets the requirements of section 177.1640, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

General Information
Features	Food Contact Acceptable General Purpose
Uses	Caps Food Service Applications General Purpose Medical/Healthcare Applications Non-specific Food Applications
Agency Ratings	FDA 21 CFR 177.1640
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.04	g/cm³
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	9.0	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.40 to 0.70	%	ASTM D955
Water Absorption (Saturation)	< 0.10	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	46.2	MPa	ASTM D638
Flexural Strength	93.1	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	100	°C	ASTM D1525
Heat Deflection Temperature - Annealed	93.0	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
Sindustris ABS LAF423B	Sincerity Australia Pty Ltd.	ABS	Sindustris ABS
TARFLON™ SC-420	Idemitsu Kosan Co., Ltd.	PC+PET	TARFLON™
Orgalloy® LE 60HM	Arkema	Nylon 6 Alloy	Orgalloy®
SD POLYCA™ CR3441-10G	Sumika Styron Polycarbonate Limited	PC+PBT	SD POLYCA™
3M™ Dyneon™ Fluoroelastomer FC 2179	3M Advanced Materials Division	Fluorelastomer	3M™ Dyneon™ Fluoroelastomer