Order Products : sales@su-jiao.com
NYCOA Polyamide 1637
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QbGGgT_NYCOA-Polyamide-1637.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 1637 is a plasticized, heat stabilized extrusion material used by the wire and cable industry for protective jacketing. NYCOA 1637 is available as a low or a high viscosity material in order to facilitate ease of processing over a range of line speeds. In addition NYCOA 1637 is available in a higher extractable version for improved flexibility in MCM size wire. NYCOA 1637 is available with custom additive packages: UV stabilizer, flame retardant and/or custom colors. NYCOA 1637 meets the rigorous requirements for a protective material and has been recognized by the Underwriters' Laboratories for jacketing of Type THHN and Type THWN thermoplastic-insulated wire. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 2.5 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 73.8 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 100 | % | ASTM D638 |
| Flexural Modulus 3 | 2100 | MPa | ASTM D790 |
| Flexural Strength 4 | 79.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 51 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 54.4 | °C | ASTM D648 |
| Melting Temperature | 220 | °C |
| Additional Information |
|---|
| The value listed as Melting Point was tested in accordance with ASTM D789.Tensile Elongation at Break, ASTM 638: 100+% |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Apec® 1697 | Covestro - Polycarbonates | PC | Apec® |
| Jampilen RP310M | Jam Polypropylene Company | PP Random Copolymer | Jampilen |
| Plaskon MUF-2B | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
| Plaslube® POM HO TL2 | Techmer Engineered Solutions | Acetal (POM) Homopolymer | Plaslube® |
| SUMIMAC® ECR-9240K | SBHPP | Epoxy | SUMIMAC® |
