Order Products : sales@su-jiao.com
DAI-EL™ G-7262 (GN-20)
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | DAI-EL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QbFSGT_DAI-EL-G-7262-GN-20-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DAI-EL G-7262 (GN-20) is a cure-incorporated copolymer with low Mooney viscosity. It is designed especially for injection molding of seals and other complex shapes, where higher elongation at molding temperatures provides easy part demolding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.81 | g/cm³ | |
| Mooney Viscosity (ML 1+10, 121°C) | 23 | MU | |
| Fluorine Content | 66 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Brittleness - TR10 | -18 | °C | ASTM D1329 |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | |||
| Shore A 1 | 73 | ||
| Shore A 2 | 74 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 3(100% Strain, 25°C) | 3.90 | MPa | |
| Tensile Strength | |||
| Yield, 25°C 4 | 11.6 | MPa | |
| Yield, 25°C 5 | 12.2 | MPa | |
| Tensile Elongation | |||
| Break, 25°C 6 | 270 | % | |
| Break, 25°C 7 | 290 | % | |
| Compression Set | ASTM D395B | ||
| 200°C, 70 hr 8 | 20 | % | |
| 200°C, 70 hr 9 | 23 | % |
| Note Message | |
|---|---|
| 1 . | ODR, Strain: 3°, Test time: 12 min |
| 2 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 3 . | ODR, Strain: 3°, Test time: 12 min |
| 4 . | ODR, Strain: 3°, Test time: 12 min |
| 5 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 6 . | ODR, Strain: 3°, Test time: 12 min |
| 7 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 8 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 9 . | ODR, Strain: 3°, Test time: 12 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimoFlo 40A-300 | KMI Group Inc. | SEBS | PrimoFlo |
| Trademark PE mLLD1918C | Trademark Plastics Corporation | mLLDPE | Trademark PE |
| DOWLEX™ NG 5056.01G | The Dow Chemical Company | LLDPE | DOWLEX™ |
| IROGRAN® A 85 P 4380 | Huntsman Corporation | TPU-Polyether | IROGRAN® |
| OTECH TPO OTR9088 - Gasket | OTECH Corporation | TPE | OTECH TPO |
