Order Products : sales@su-jiao.com

Ebalta GM 951-1 / Comp. A+B

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Ebalta Kunststoff GmbH
Trademark:	Ebalta
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QYIDIn_Ebalta-GM-951-1-Comp-A-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The product is a very soft elastic polyurea casting compound. ebalta GM 951-1 is suitable as a flexible casting system in the field of mould- and tooling for parts which require low shore hardness and high tear propagation resistance due to deep under cuts. Applications Casting mould for gypsum Casting mould for plastic Casting mould for wax Casting mould for ceramic materials Casting mould for PU-foam Casting mould for cement Gaskets Sealing profiles in core boxes fixtures Properties shore A hardness 45 well castable good tear propagation resistance

Message

The product is a very soft elastic polyurea casting compound.

ebalta GM 951-1 is suitable as a flexible casting system in the field of mould- and tooling for parts which require low shore hardness and high tear propagation resistance due to deep under cuts.

Applications

Casting mould for gypsum

Casting mould for plastic

Casting mould for wax

Casting mould for ceramic materials

Casting mould for PU-foam

Casting mould for cement

Gaskets

Sealing profiles in core boxes

fixtures

Properties

shore A hardness 45

well castable

good tear propagation resistance

General Information
Features	Good Flexibility Soft
Uses	Gaskets Molds/Dies/Tools Seals
Appearance	Black
Processing Method	Casting

Hardness	Nominal Value		Test Method
Shore Hardness (Shore A)	42 to 48		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	1.80 to 2.20	MPa	ISO 37
Tensile Elongation ²(Break)	880 to 1100	%	ISO 37
Tear Strength ³(1.00 mm)	5.0 to 6.0	kN/m	ISO 34-1

Thermoset	Nominal Value	Unit
Thermoset Components
Hardener	Mix Ratio by Weight: 10
Resin	Mix Ratio by Weight: 100

Uncured Properties	Nominal Value	Unit
Density (20°C)	1.12 to 1.18	g/cm³
Viscosity (25°C)	4.1 to 4.5	Pa·s
Curing Time (20°C)	7.0 to 10	hr
Pot Life ⁴(20°C)	17 to 27	min

Note Message
1 .	Type 2
2 .	Type 2
3 .	Arch shaped test piece with incision
4 .	200 g

Resin Grade	Manufacturer	Category	Trademark
Quadrant EPP CESTILENE HD 500R	Quadrant Engineering Plastic Products	HMWPE	Quadrant EPP
THERMOLAST® K TC6GPN (Series: GP/FG)	KRAIBURG TPE	TPE	THERMOLAST® K
Sylvin 6930X06 Green 3200	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
PrimoSan X663	KMI Group, Inc.	SAN	PrimoSan
Sylvin 9067-65 Brown 7403	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin