Order Products : sales@su-jiao.com
Pebax® HD 5513 SP 01
| Category: | PEBA-Ether , Polyether Block Amide |
| Manufacturer: | Arkema |
| Trademark: | Pebax® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QYAg46_Pebax-HD-5513-SP-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polyether bloc amide Pebax® HD 5513 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Added to PA6, Pebax® HD 5513 SP 01 enhances the properties of PA6, especially at low temperatures and low humidity content, at the same time maintaining the transparency of the nylon film and improving its soft touch. This SP grade has been developed to be heat and UV resistant. Note that this grade was formerly named Pebax® MP 1878 SP 01. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.09 | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 6.7 | % | |
| Equilibrium, 23°C, 50% RH | 1.3 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore D | 58 | ||
| Shore D, 15 sec | 54 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 60.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 500 | % | ISO 527-2 |
| Flexural Modulus | 180 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -40°C | 34 | kJ/m² | |
| 23°C | No Break | ||
| Charpy Unnotched Impact Strength | ISO 179 | ||
| -40°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 169 | °C | ISO 306 |
| Melting Temperature | 195 | °C | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 to 90.0 | °C | |
| Drying Time | 5.0 to 7.0 | hr | |
| Processing (Melt) Temp | 220 to 260 | °C | |
| Mold Temperature | 25.0 to 60.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 to 90.0 | °C | |
| Drying Time | 5.0 to 7.0 | hr | |
| Melt Temperature | 220 to 250 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEFTEKHIM PS 585V | Nizhnekamskneftekhim Inc. | PS (GPPS) | NEFTEKHIM PS |
| DINALON® B1S25 G25 | Grupo Repol | Nylon 6 | DINALON® |
| Hylon® N1000TH | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| Lupoy® 3030-08 | LG Chem Ltd. | PC | Lupoy® |
| MACOMASS TPE MM-TPE O 1461 | MACOMASS Verkaufs AG | TPE | MACOMASS TPE |
