Order Products : sales@su-jiao.com
Lupolen GX 5038
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Lupolen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QTBoEy_LupolenGX5038.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Lupolen GX 5038 is a new generation hexene linear high-density polyethylene for injection molding. Typical customer applications may include SCR reservoirs (SCR = Selective Catalytic Reduction). Lupolen GX 5038 is a pelletized polymer. It is not intended for use in medical and pharmaceutical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.945 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ISO 1133 |
| FNCT - 6.0 MPa 1(50°C) | 1.5 | day | ISO 16770 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 900 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 22.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 10 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | ISO 8256/1A | ||
| -30°C | 100 | kJ/m² | ISO 8256/1A |
| 23°C | 170 | kJ/m² | ISO 8256/1A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 - 230 | °C |
| Note Message | |
|---|---|
| 1 . | 2% Arkopal N100 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 3100-10 | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| RTP 1105 L | RTP Company | PET | RTP |
| Converge® Polyol 212-10 | Novomer, Inc. | PC | Converge® |
| ExxonMobil™ LDPE LD 202.48 | ExxonMobil Chemical | LDPE | ExxonMobil™ LDPE |
| Forprene® 6NE001D50 | SO.F.TER. SPA | TPV | Forprene® |
