Resinol HDPE Type F Datasheet,HDPE,Spartech Plastics-SHANGHAI SUSHENG

Message
Resinol HDPE Type F is a high density polyethylene product,. It can be processed by extrusion and is available in North America. Resinol HDPE Type F applications include containers, consumer goods and food contact applications. Features include: Hard Heat resistance

General Information
Features	Rigidity, high Thermal stability, good
Uses	Tools/Parts Box Food service sector Toys
Appearance	Natural color
Forms	Particle
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--	0.948	g/cm³	ASTM D792
--	0.953	g/cm³	ASTM D1505
Environmental Stress-Cracking Resistance	1000	hr	ASTM D1693

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	63		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	414	MPa	ASTM D638
Tensile Strength			ASTM D638
Yield	17.9	MPa	ASTM D638
-- ¹	28.3	MPa	ASTM D638
Tensile Elongation ²(Yield)	360	%	ASTM D638
Compressive Strength	23.4	MPa	ASTM D695
Deformation Under Load	14.5	%	ASTM D621

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	43	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	73.9	°C	ASTM D648
Brittleness Temperature	-118	°C	ASTM D746
Vicat Softening Temperature	120	°C	ASTM D1525
CLTE - Flow	2.3E-4	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	6.0E+15	ohms·cm	ASTM D257
Dielectric Strength	20	kV/mm	ASTM D149
Dielectric Constant			ASTM D150
100 kHz	2.32		ASTM D150
1 MHz	2.32		ASTM D150
Dissipation Factor			ASTM D150
100 kHz	1.0E-4		ASTM D150
1 MHz	1.0E-4		ASTM D150

Additional Information
Density, ASTM D1505: 0.941 to 0.965g/ccTensile Strength, ASTM 638, 20in/min: 2600 to 4800psiTensile Strength, ASTM 638, 2in/min: 3500 to 4700psiNotched Izod Impact Strength, ASTM D256: .8 to 14 ft-lb/inBrittleness Temperature, ASTM D746: <-180°F (-118°C) to -100°F(-73°C)Hardness, Shore D: 55-70Modulus of Elasticity, ASTM D638: 60000 to 150000 psiCompressive Stress, ASTM D695: 3200 to 3600 psiDissipation Factor, ASTM D1513, 100000: < 0.0001Dissipation Factor, ASTM D1513, 1000000: < 0.0001Elongation, ASTM D638,20in/min:12-700%Elongation, ASTM D638,2in/min:128-860%Volume Resistivity: >6E15 ohm-cm

Additional Information

Density, ASTM D1505: 0.941 to 0.965g/ccTensile Strength, ASTM 638, 20in/min: 2600 to 4800psiTensile Strength, ASTM 638, 2in/min: 3500 to 4700psiNotched Izod Impact Strength, ASTM D256: .8 to 14 ft-lb/inBrittleness Temperature, ASTM D746: <-180°F (-118°C) to -100°F(-73°C)Hardness, Shore D: 55-70Modulus of Elasticity, ASTM D638: 60000 to 150000 psiCompressive Stress, ASTM D695: 3200 to 3600 psiDissipation Factor, ASTM D1513, 100000: < 0.0001Dissipation Factor, ASTM D1513, 1000000: < 0.0001Elongation, ASTM D638,20in/min:12-700%Elongation, ASTM D638,2in/min:128-860%Volume Resistivity: >6E15 ohm-cm

Note Message
1 .	51 mm/min
2 .	510 mm/min

Category:	HDPE , High Density Polyethylene
Manufacturer:	Spartech Plastics
Trademark:	RESINOL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QQyLsU_Resinol-HDPE-Type-F.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
ALCOM® PC 740/4 BL1411-07LD	ALBIS PLASTIC GmbH	PC	ALCOM® PC
Colorite G Series 8511G-015	Colorite Polymers	PVC, Flexible	Colorite G Series
Pebax® 7033 SA 01	Arkema	PEBA-Ether	Pebax®
Sumikon® FM-MK-160B	SBHPP	PPS	Sumikon®
PENTAMID L GV20 H black	PENTAC Polymer GmbH	Nylon 12	PENTAMID L