Order Products : sales@su-jiao.com
Westlake LDPE EC1924AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QK92dt_Westlake-LDPE-EC1924AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WESTLAKE low-density polyethylene EC1924 is a resin that is widely used in the boardstock coating industry. This material has an excellent combination of low neck-in, ease of processing, good chill-roll release, low coefficient offriction (COF) (for ease of indexing carton blanks) and good heat sealability. It is characterized by high-speed processability, excellent drawdown and reliable lot-to-lot consistency. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.2 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break, 23°C) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C) | 100 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 3(23°C) | 310 | MPa | ASTM D790 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 302 to 329 | °C |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIREX® 3020PJ | Samyang Corporation | PC | TRIREX® |
| Badadur® PBT8 | Bada AG | PBT | Badadur® |
| Amilan® CM1023G1000 | Toray Resin Company | Nylon 6 | Amilan® |
| ARCEL® 640 (2.50 pcf) | NOVA Chemicals | PS+PE | ARCEL® |
| Plexiglas® LED 8N LD96 | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
