Order Products : sales@su-jiao.com
HIVOREX 8000M
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Lotte Chemical Corporation |
| Trademark: | HIVOREX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QHDPI1_HIVOREX-8000M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Good Processability Good ESCR PE 100 (MRS 10) |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.040 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 57 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 21.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 700 | % | ASTM D638 |
| Flexural Modulus | 883 | MPa | ASTM D790 |
| Hydrostatic Pressure Test | ISO 1167 | ||
| 12.4 MPa : 20°C | > 200 | ||
| 5.0 MPa : 80°C | > 5000 | ||
| 5.5 MPa : 80°C | > 1000 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Induction Time (200°C) | > 30 | min | ISO 10837 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen S30SW | Shazand (Arak) Petrochemical Corporation | PP Homopolymer | Moplen |
| BESTNYL SI50VI02ANU | Triesa Plastics | Nylon 6 | BESTNYL |
| Epoxies, Ect. 20-3035 (Cat.140) | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| INNOPOL® PP CS 2-2130 TA | Inno-Comp Ltd. | PP Impact Copolymer | INNOPOL® PP |
| INNOPOL® PP CS 2-1000 | Inno-Comp Ltd. | PP Copolymer | INNOPOL® PP |
