Order Products : sales@su-jiao.com
DOW™ HDPE DMDD-1210 NT 7
| Category: | HDPE , High Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | 陶氏高密度聚乙烯 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QGX8Yz_DOWHDPEDMDD1210NT7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW™ DMDD-1210 NT 7 High Density Polyethylene Resin is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Typical applications include injection molded closures for water, juice, dairy, and sports drinks, including hot fill and aseptic bottling applications, where minimizing the contribution of the package to the taste of the product and use of slip is a requirement. Main Characteristics:
Complies with:
|
| General Information | |
|---|---|
| Additive |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D972 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 50°C, 10% Igepal, F50 | 12.0 | hr | ASTM D1693 |
| 50°C, 100% Igepal, F50 | 22.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 59 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 27.3 | MPa | ASTM D638 |
| Fracture | 20.5 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 13 | % | ASTM D638 |
| Fracture | 1500 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 1050 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 125 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 130 | °C | Internal method |
| Additional Information |
|---|
| Plaque molded and tested in accordance with ASTM D 4976. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 9993-65 Red 6210 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 9812-85 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Monprene® CP-18185 | Teknor Apex Company | TPE | Monprene® |
| Diamond PC 1008 | Network Polymers, Inc. | PC | Diamond PC |
| Politer 30 GF EM1 | Poliblend S.p.a. | PBT | Politer |
