Order Products : sales@su-jiao.com
Sultron® R20
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Asia International Enterprise (Hong Kong) Limited |
| Trademark: | Sultron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QDSfeA_Sultron-R20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sultron®R20 is a polyphenylene sulfide (PPS) material, and its filler is 20% glass fiber reinforced material. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. Sultron®The main features of R20 are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.42 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.70 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 130 | MPa | ISO 527-2 |
| Flexural Modulus | 10500 | MPa | ISO 178 |
| Flexural Stress | 180 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 14 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 270 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 250 | °C | ISO 75-2/A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.800 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 140 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 310 - 320 | °C | |
| Middle Temperature | 320 - 340 | °C | |
| Front Temperature | 330 - 340 | °C | |
| Nozzle Temperature | 290 - 300 | °C | |
| Mold Temperature | 80.0 - 150 | °C | |
| Injection Pressure | 30.0 - 120 | MPa | |
| Holding Pressure | 40.0 - 50.0 | MPa | |
| Back Pressure | 5.00 - 10.0 | MPa | |
| Screw Speed | 40 - 80 | rpm |
| Injection instructions |
|---|
| Cylinder Temperature 4: 290 to 310°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU P25M | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| NuSil MED-4880 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| Hanwha Total PE E220F | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | EVA | Hanwha Total PE |
| LubriOne™ NN-10GM/05T MG6 | PolyOne Corporation | Nylon 66 | LubriOne™ |
| MAJORIS BG384 | AD majoris | PP, Unspecified | MAJORIS |
