Order Products : sales@su-jiao.com
EPLON 6 GFR 30 BK
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | EPSAN Plastik SAN. ve TiC. A.S. |
| Trademark: | EPLON 6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QChBCM_EPLON-6-GFR-30-BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Eplon 6 is glass fiber reinforced polyamide 6 and is suitable for injection moulding. This product is available in black and in colours on request. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.31 - 1.36 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction : 3.00mm | 0.70 | % | ISO 294-4 |
| Flow direction : 3.00mm | 0.40 | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 0.20 | % | ISO 62 |
| Ash Content | 28 - 32 | % | ISO 3451-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 23°C) | 80 - 85 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 7000 - 8500 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 110 - 140 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 2.0 - 4.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 4500 - 6000 | MPa | ISO 178 |
| Flexural Stress (23°C) | 130 - 180 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 7.0 - 11 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact (23°C) | 7.0 - 11 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 210 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 205 | °C | ISO 306/B |
| Melting Temperature (DSC) | 200 - 230 | °C | ISO 3146 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Additional Information |
|---|
| TEST CONDITIONS: Laboratory conditions are 23 ±2°C and 45-55 % RH. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 260 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Qenos PE MD0592 | Qenos Pty Ltd | MDPE | Qenos PE |
| RTP 102CC GB 15 | RTP Company | PP Homopolymer | RTP |
| BFI 428 | Blueridge Films Inc. | HDPE | BFI |
| Lastilac SP G/17 | LATI S.p.A. | ABS | Lastilac |
| OXNILON 66 ST-14GF | Oxford Polymers | Nylon 66 | OXNILON 66 |
