Order Products : sales@su-jiao.com
OnFlex™ S EH 50A-3S7002
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | OnFlex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QARhzK_OnFlex-S-EH-50A-3S7002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| OnFlex™-S EH thermoplastic elastomer polymer is mixed with hydrogenated styrene block copolymer. In addition to having OnFlex™The main characteristics of-S products, such as high hardness, good mechanical properties, good processability, good coloring properties, and a large operating temperature range, this series of polymers has excellent cost performance. OnFlex™-S EH polymer is filled with other substances, so it is opaque and has a relatively high density. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 50 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% strain | 1.50 | MPa | ISO 37 |
| 300% strain | 2.20 | MPa | ISO 37 |
| Tensile Stress (Break) | 4.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | 680 | % | ISO 37 |
| Tear Strength | 19 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 21 | % | ISO 815 |
| 70°C, 22 hr | 43 | % | ISO 815 |
| 100°C, 22 hr | 74 | % | ISO 815 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Fogging (100°C) | 9.0E-4 | g | DIN 75201B |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Odor rating | 2.50 | VDA 270 | |
| General Material Type | Styrene thermoplastic elastomers (TES) | ||
| 各项属性值是采用注射模制基板测量得出。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 - 220 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 105 CC HI | RTP Company | PP, Unspecified | RTP |
| APEX® 94-A0098A-84 | Teknor Apex Company | PVC, Flexible | APEX® |
| ACRYPET® VHM | Lucite International Holland BV | Acrylic (PMMA) | ACRYPET® |
| Comco PA6G HEAT | Comco Nylon GmbH | Nylon 6 | Comco |
| LNP™ LUBRICOMP™ DL002 compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
