Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Molding M3530
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Molding |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QAIggf_GeonVinylRigidMoldingM3530.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon™Vinyl Rigid Molding M3530 is a rigid polyvinyl chloride product,. It is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: engineering/industrial accessories. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.20 - 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2270 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 39.3 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 110 | % | ASTM D638 |
| Flexural Modulus | 2420 | MPa | ASTM D790 |
| Flexural Strength | 67.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| 0°C, 3.18mm, injection molding | 1000 | J/m | ASTM D256A |
| 23°C, 3.18mm, injection molding | 1200 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.18mm | 67.0 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 3.18mm | 57.9 | °C | ASTM D648 |
| RTI Elec | 50.0 | °C | UL 746 |
| RTI Imp | 50.0 | °C | UL 746 |
| RTI | 50.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.5, all | V-0 | UL 94 | |
| 2.0, all | 5VA | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 - 210 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Type 1, 5.1 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| StarMediflex P 7020-1000 | STAR Thermoplastic Alloys & Rubbers, Inc. | TPE | StarMediflex |
| TAROLOX 111 G5 DX03 | Taro Plast S.p.A. | PET | TAROLOX |
| TROSIFOL® Solar R40 | Kuraray Co., Ltd. | PVB | TROSIFOL® |
| Fainplast PVC KL 90/2 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| LNP™ LUBRICOMP™ PFN16 compound | SABIC Innovative Plastics | Nylon 6 | LNP™ LUBRICOMP™ |
