Order Products : sales@su-jiao.com
Alpha PVC GM 8015-O NATURAL LCF
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Q9VuGG_Alpha-PVC-GM-8015-O-NATURAL-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A LEAD / CADMIUM FREE, 105°C RATED, UL94 V-2, FLAME RETARDED ELECTRICAL GRADE MOLDING COMPOUND. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 to 1.32 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 92 to 98 | ||
| Shore A, 15 sec | 86 to 92 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (1.91 mm) | 13.8 | MPa | ASTM D412 |
| Tensile Elongation (Break, 1.91 mm) | 280 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1(136°C, 168 hr) | -5.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2(136°C, 168 hr) | -20 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -18.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 3.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Constant (23°C, 100 MHz) | 2.85 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.015 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-2 | UL 94 | |
| Oxygen Index (3.18 mm) | 28 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | Thickness: 75 mil |
| 2 . | Thickness: 75 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TES J-1200/30 NAT | Techmer Engineered Solutions | ABS | TES |
| ULTEM™ 2110 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Ketron® PEEK UHP320 | Quadrant Engineering Plastic Products | PEEK | Ketron® |
| ISPLEN® PM 281 BV | REPSOL | PP Copolymer | ISPLEN® |
| PENTAMID A E15 H black | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
