Order Products : sales@su-jiao.com
Braskem PE SPB608
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Braskem America Inc. |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Q6MR3x_Braskem-PE-SPB608.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: SPB608 is a low density polyethylene designed for injection molding. This grade shows excellent processability being indicated for applications where low viscosity is required during processing. Injection molded products with this resin shows good flexibility. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Masterbatches. Covers and injected parts with large flat area. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.915 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 39 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, molding | 8.00 | MPa | ASTM D638 |
| Fracture, molding | 8.00 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 390 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 450 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 79.0 | °C | ASTM D1525 1 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Biobased Content | > 95 | % | ASTM D6866 |
| Injection instructions |
|---|
| Recommended Processing Conditions: Temperature profile.........................from 180 to 210°C Mold temperature............................5 to 25°C |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrathane™ ALC-55D | Biomerics, LLC | TPU-PC | Quadrathane™ |
| BFI 1880 | Blueridge Films Inc. | mPE | BFI |
| HiFill® PP GF/M50 BK | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
| LUVOCOM® 1105/GF/30/NAT-2 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| Polifor® C L6 GF/30 NATURALE | SO.F.TER. SPA | PP Copolymer | Polifor® |
