Order Products : sales@su-jiao.com
Kingfa NHPP-FR
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Kingfa |
| Trademark: | Kingfa |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Q2EEF0_Kingfa-NHPP-FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Kingfa NHPP-FR is a Polypropylene material. It is available in Asia Pacific or North America. Important attributes of Kingfa NHPP-FR are:
Typical application of Kingfa NHPP-FR: Electrical/Electronic Applications |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 1.4 to 1.6 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(23°C, Injection Molded) | 28.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C, Injection Molded) | 60 | % | ASTM D638 |
| Flexural Modulus 3(23°C, Injection Molded) | 1600 | MPa | ASTM D790 |
| Flexural Strength 4(23°C, Injection Molded) | 30.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 47 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.40 mm, Injection Molded | 115 | °C | |
| 1.8 MPa, Unannealed, 6.40 mm, Injection Molded | 110 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| CoREZYN® COR75-AQ-393 | Interplastic Corporation | Vinyl Ester | CoREZYN® |
| Formolene® 5143C | Formosa Plastics Corporation, U.S.A. | PP Homopolymer | Formolene® |
| LEXAN™ HFD1212 resin | SABIC Innovative Plastics | PC | LEXAN™ |
| Isocor™ 4007 | Shakespeare Monofilaments and Specialty Polymers | Nylon 6 | Isocor™ |
| HIPEX® HX7IDN (Series: HTR/OR) | KRAIBURG TPE | TPE | HIPEX® |
