Order Products : sales@su-jiao.com
Polymer-E M5100
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Asia Polymer Corporation (APC) |
| Trademark: | Polymer-E |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Py85gI_Polymer-E-M5100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polymer-E M5100 is a Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific. Typical application: Coating Applications. Primary characteristic: good processability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 46 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 7.85 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 240 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 45.0 | °C | ASTM D648 |
| Brittleness Temperature | < -60.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 80.0 | °C | ASTM D1525 |
| Melting Temperature | 101 | °C | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LAF479 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| NatureFlex™ NP 110 | Innovia Films Ltd. | Cellulose, Regenerated | NatureFlex™ |
| HiFill® TPU 0266 A | Techmer Engineered Solutions | TPU, Unspecified | HiFill® |
| KOPLA PA6 KNG1060 | KOPLA Co., Ltd. | Nylon 6 | KOPLA PA6 |
| Osterlene® HIE-4-1.9 | Osterman & Company | PS (HIPS) | Osterlene® |
