Order Products : sales@su-jiao.com
HTM® 515-1
| Category: | MAH-g , Maleic Anhydride Grafted Polymer |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | HTM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Px3SYh_HTM-515-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HTM® 515-1 is a controlled flow, high temperature bismaleimide (BMI) resin tooling matrix system offering improved handling characteristics and after appropriate post-cure, thermal cycling capability up to 250°C (482°F). HTM 515-1 is supplied in a range of standard prepreg formats for the manufacture of high temperature composite tooling. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity 1 | 1.24 | g/cm³ | |
| Shrinkage 2 | 0.064 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 2.9E-6 | cm/cm/°C |
| Note Message | |
|---|---|
| 1 . | Cured resin |
| 2 . | 6 hours at 190°C (374°F), 6.2bar (90psi) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 3101-25 | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| UNISOFT ADHESION™ AD-45A-NT-5-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT ADHESION™ |
| Fiberfil® J-68/10/E | Fiberfil® Engineered Plastics Inc. | PP Copolymer | Fiberfil® |
| Grilamid® L 25 nat 6112 | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Jampilen HP420M | Jam Polypropylene Company | PP Homopolymer | Jampilen |
