Order Products : sales@su-jiao.com

ESENTTIA 06C30DA

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PuGY2g_ESENTTIA-06C30DA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Characteristics: Control reologhy Impact block copolymer polypropylene; excellent impact/stiffness balance; consistent processability lot to lot; high process speed and easy removal of the molded pieces; good superficial gloss; moderately narrow molecular weight distribution; with mold release and antistatic additive.

Recommended for: Extrusion compression molding or injection molding processes of closures for carbonated beverages or not, where high stiffness and impact resistance is necessary (warm or cold environmental); housewares; injection molding general purpose applications.

General Information
Additive	Antistatic Mold Release
Features	Antistatic Block Copolymer Controlled Rheology Fast Molding Cycle Food Contact Acceptable General Purpose Good Mold Release High Impact Resistance High Stiffness Medium Gloss Narrow Molecular Weight Distribution
Uses	Closures General Purpose Household Goods
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Compression Molding Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	7.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	30.3	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	6.3	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	1520	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	110	J/m	ASTM D256A
Gardner Impact ⁵(23°C, 3.20 mm, Injection Molded)	28.2	J	ASTM D5420

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min
5 .	Method A

Resin Grade	Manufacturer	Category	Trademark
RTP 301-500	RTP Company	PC	RTP
Michiflex E9287A	API Polymers, Inc.	TPV	Michiflex
SUMILITE® CEL-4361	Sumitomo Bakelite Co., Ltd.	LLDPE	SUMILITE®
Bergamid™ A70 G15 U NC	PolyOne Corporation	Nylon 66	Bergamid™
PLUSTEK PA350M4	Polyram Ram-On Industries	Nylon 66	PLUSTEK