Order Products : sales@su-jiao.com
Andur 75 DGP 2
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PsCGVp_Andur-75-DGP-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 75 DGP-2 is a polyether (PTMG) based liquid isocyanate- terminated prepolymer. An elastomer with a hardness of 75 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'- methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, and by the use of plasticizers. Andur 75 DGP-2 was designed to have a longer pot life for those who require more time for casting. Due to its lower %NCO, compared to other 75D materials, Andur 75 DGP-2 is much more economical to process, as approximately 20% less curing agent is required. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 3450 | cP | ASTM D2393 |
| 100°C | 400 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 7.7 to 8.3%Specific Gravity, ASTM D792, 77°F: 1.12 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UMG ABS® VW702S | UMG ABS, Ltd. | ABS | UMG ABS® |
| NYCOA Polyamide 7551 Nat | Nycoa (Nylon Corporation of America) | Nylon 12 | NYCOA Polyamide |
| Polifil® PP GFRMPPCC-40 | The Plastics Group | PP Impact Copolymer | Polifil® PP |
| Hylex® P1310L1 | Entec Polymers | PC | Hylex® |
| Moplen EP549T | LyondellBasell Industries | PP Impact Copolymer | Moplen |
