Order Products : sales@su-jiao.com

Boda BDBR-H5701

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Chenguang Fluoro & Silicone Elastomers Co., Ltd.
Trademark:	Boda
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Pr4NGn_Boda-BDBR-H5701.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Material Type: Black color base (alkali) resistance grade fluoroelastomer compound, hardness Shore A 65~75. Based on peroxide curable fluoroelastomer with high fluorine content.

Features:

Short post cure time

Excellent mold flow and mold release, resulting in less flash

Extraordinary chemical resistance:

Alkali

Alcohol Fuel

Steam

Acids

Chemicals containing amines, aromatics.

Process Methods: Suitable for compression, transfer molding processes.

Applications: Replacement of AFLAS, sealing parts in oilfield, heat exchangers gaskets.

Lab Testing Curing Condition:

Press Curing: 10min@170°C.

Oven: (1+4)hrs@230°C

General Information
Features	Acid Resistant Alcohol Resistant Alkali Resistant Fuel Resistant Good Chemical Resistance Good Flow Good Mold Release Good Moldability Minimal Flash Steam Resistant
Uses	Gaskets Seals
Appearance	Black
Processing Method	Compression Molding Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.98	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	71		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	16.0	MPa	ASTM D412
Tensile Elongation (Break)	190	%	ASTM D412
Compression Set ¹(200°C, 70 hr)	35	%	ASTM D395

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (250°C, 70 hr)	-14	%	ASTM D573
Change in Ultimate Elongation in Air (250°C, 70 hr)	-6.0	%	ASTM D573
Change in Durometer Hardness in Air (250°C, 70 hr)	2.0		ASTM D573
Change in Tensile Strength (23°C, 70 hr, in Reference Fuel C)	-12	%	ASTM D471
Change in Ultimate Elongation (23°C, 70 hr, in Reference Fuel C)	-9.0	%	ASTM D471
Change in Durometer Hardness (23°C, 70 hr, in Reference Fuel C)	-3.0		ASTM D471
Change in Volume (23°C, 70 hr, in Reference Fuel C)	3.0	%	ASTM D471

Note Message
1 .	6 mm Buttons

Resin Grade	Manufacturer	Category	Trademark
Makrolon® GF8002	Covestro - Polycarbonates	PC	Makrolon®
SEETEC EVA VC640	Lotte Chemical Corporation	EVA	SEETEC EVA
SUMIPLOY® GS5420	Sumitomo Chemical Co., Ltd.	PESU	SUMIPLOY®
APICAL 300AV	Kaneka Corporation	PI, TS	APICAL
GERMADUR KSZ GF 30	Kunststoff-Kontor-Hamburg GmbH	PBT	GERMADUR