Ultramid® A3X2G5 Datasheet,Nylon 66,BASF Corporation-SHANGHAI SUSHENG

Message
Ultramid A3X2G5 is a 25% glass fiber reinforced injection molding PA66 grade with improved flame retardance and enhanced long-term performance. Flame retardant based on red phosphorus; outstanding mechanical and electrical properties.

General Information
Filler / Reinforcement	Glass Fiber, 25% Filler by Weight
Additive	Flame Retardant
Features	Flame Retardant Good Electrical Properties Oil Resistant
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1) Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Dry	Conditioned	Unit	Test Method
Specific Gravity	1.34	--	g/cm³	ASTM D792, ISO 1183
Melt Volume-Flow Rate (MVR) (275°C/5.0 kg)	40.0	--	cm³/10min	ISO 1133
Molding Shrinkage - Flow (3.18 mm)	0.50	--	%
Water Absorption
Saturation	6.0	--	%	ASTM D570
Saturation, 23°C	6.0	--	%	ISO 62
Equilibrium, 50% RH	1.4	--	%	ASTM D570
Equilibrium, 23°C, 50% RH	1.4	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	8500	6000	MPa	ISO 527-2
Tensile Strength
Break, 23°C	138	--	MPa	ASTM D638
Break, -40°C	196	--	MPa	ISO 527-2
Break, 23°C	140	100	MPa	ISO 527-2
Tensile Elongation
Break, 23°C	3.0	--	%	ASTM D638
Break, 23°C	3.0	4.5	%	ISO 527-2
Flexural Modulus (23°C)	7100	--	MPa	ASTM D790

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179
-30°C	10	--	kJ/m²
23°C	13	17	kJ/m²
Charpy Unnotched Impact Strength				ISO 179
-30°C	60	65	kJ/m²
23°C	65	70	kJ/m²
Notched Izod Impact				ASTM D256
-40°C	64	--	J/m
23°C	75	--	J/m

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load
0.45 MPa, Unannealed	250	--	°C	ASTM D648, ISO 75-2/B
1.8 MPa, Unannealed	238	--	°C	ASTM D648
1.8 MPa, Unannealed	250	--	°C	ISO 75-2/A
Peak Melting Temperature	260	--	°C	ASTM D3418, ISO 3146
CLTE
Flow	2.0E-5	--	cm/cm/°C	ASTM E831
Flow	3.0E-5	--	cm/cm/°C
Transverse	7.0E-5	--	cm/cm/°C
RTI Elec				UL 746
0.400 mm	110	--	°C
0.810 mm	120	--	°C
1.50 mm	120	--	°C
3.00 mm	120	--	°C
RTI Imp				UL 746
0.400 mm	115	--	°C
0.810 mm	115	--	°C
1.50 mm	115	--	°C
3.00 mm	115	--	°C
RTI Str				UL 746
0.810 mm	130	--	°C
1.50 mm	130	--	°C
3.00 mm	130	--	°C

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity
1.50 mm	1.0E+13	1.0E+10	ohms·cm	ASTM D257
--	1.0E+13	1.0E+10	ohms·cm	IEC 60093
Electric Strength	33	30	kV/mm	IEC 60243-1
Dielectric Constant (1 MHz)	3.70	5.00		IEC 60250
Dissipation Factor (1 MHz)	0.020	0.10		IEC 60250
Comparative Tracking Index	550	550	V	IEC 60112

Flammability	Dry	Conditioned	Test Method
Flame Rating			UL 94
0.810 mm	V-0	--
1.50 mm	V-0	--
3.00 mm	V-0	--

Category:	Nylon 66 , Polyamide 66
Manufacturer:	BASF Corporation
Trademark:	Ultramid®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PqgaXD_Ultramid-A3X2G5.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Matrixx TPP2B40	The Matrixx Group, Inc.	PP Copolymer	Matrixx
ResMart Ultra PBT 23	ResMart	PBT	ResMart Ultra
Spartech Polycom SCR7F-7010AUR	Spartech Polycom	PC	Spartech
Delrin® 150 NC010	DuPont Performance Polymers	Acetal (POM) Homopolymer	Delrin®
Hostacom TRC 352NA 82V TITAN SCHWARZ	LyondellBasell Industries	TPO (POE)	Hostacom