Order Products : sales@su-jiao.com

Pinnacle PP 1635

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PpI9H4_Pinnacle-PP-1635.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

35 MELT FLOW HOMOPOLYMER

Pinnacle Polymers Polypropylene 1635 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for low denier per filament yarns; extrusion coating applications; and specialty cast embossed films.

The 1635 product provides:

Excellent color and processing stability

Superior fiber spinning characteristics

Resistance to gas fading

Excellent component for extrusion coating

Narrow Molecular Weight Distribution

Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

General Information
Features	Food Contact Acceptable Gas-fading Resistant Good Color Stability Good Processing Stability Homopolymer Narrow Molecular Weight Distribution
Uses	Cast Film Coating Applications Yarn
Agency Ratings	FDA 21 CFR 177.1520(c) 1.1a
Forms	Pellets
Processing Method	Cast Film Extrusion Coating Fiber (Spinning) Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	35	g/10 min	ASTM D1238
Molding Shrinkage - Flow	1.2	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	34.5	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	10	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1550	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	27	J/m	ASTM D256
Notched Izod Impact (Area) ⁵(23°C, 3.20 mm, Injection Molded)	2.60	kJ/m²	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	99.0	°C	ASTM D648

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I
5 .	Type I

Resin Grade	Manufacturer	Category	Trademark
POLYLAN AG10AP	POLYMA Kunststoff GmbH & Co. KG	ABS	POLYLAN
Radilon® A HSK 372 M NER	Radici Plastics	Nylon 66	Radilon®
Ultradur® B 4300 G2 BK5110	BASF Corporation	PBT	Ultradur®
Adell Polyamide AH-18	Adell Plastics, Inc.	Nylon 66	Adell Polyamide
PENTAMID A GV20 GK10 H natural	PENTAC Polymer GmbH	Nylon 66	PENTAMID A