Order Products : sales@su-jiao.com
Sinvicomp DBS5608
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Pos9eI_Sinvicomp-DBS5608.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sinvicomp DBS5608 is a Rigid Polyvinyl Chloride material. It is available in Asia Pacific for extrusion. Primary attribute of Sinvicomp DBS5608: Impact Resistant. Typical application of Sinvicomp DBS5608: Plumbing/Piping/Potable Water |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 40.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 150 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 94.0 | °C | ASTM D1525 |
| Thermal Stability 3(190°C) | > 30 | min | BS 2782 |
| Note Message | |
|---|---|
| 1 . | 250 mm/min |
| 2 . | 250 mm/min |
| 3 . | Congo Red |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1307 TFE 20 | RTP Company | PPS | RTP |
| Capa™ 6800 | Perstorp Holding AB | PCL | Capa™ |
| EPIGUM EXP/53 | Crosspolimeri S.p.A. | TPE | EPIGUM |
| INSULCAST® RTVS 11 | ITW Polymers Coatings North America | Silicone Rubber, RTV-2 | INSULCAST® RTVS |
| KEBAFORM® C 906 UR | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
