Order Products : sales@su-jiao.com
Acculam™ Phenolfab Linen L/LE
| Category: | Phenolic , Phenolic |
| Manufacturer: | Accurate Plastics, Inc. |
| Trademark: | Acculam™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Pof0nN_Acculam-Phenolfab-Linen-L-LE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Acculam® Phenolfab L/ LE - Laminate sheet comprised of a phenolic resin and a woven linen (cotton) substrate. This material qualifies to NEMA L/LE and MIL-I-24768/13/15. This material's improved moisture resistance and machining characteristics allow its use in a wider range of electrical and structural applications than paper grades. Its finer weave fabric also allows for finer machined details& thinner sheets than grades C and CE. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr, 3.18 mm) | < 1.3 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength | ASTM D790 | ||
| 3.18 mm 1 | > 100 | MPa | |
| 3.18 mm 2 | > 114 | MPa | |
| Compressive Strength 3 | 255 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -- 4 | > 53 | J/m | |
| -- 5 | > 67 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Temperature Index | 125 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Breakdown | |||
| -- 6 | > 3000 | V | |
| A | > 40000 | V |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Bond Strength | 730000 | g |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Relative Permittivity | IEC 60250 | ||
| -- 7 | 6.00 | ||
| -- 8 | 5.80 | ||
| Dissipation Factor | ASTM D150 | ||
| -- 9 | 0.070 | ||
| -- 10 | 0.055 |
| Note Message | |
|---|---|
| 1 . | CW-A |
| 2 . | LW-A |
| 3 . | Flatwise |
| 4 . | CW |
| 5 . | LW |
| 6 . | D48/50 |
| 7 . | D24/23 |
| 8 . | A |
| 9 . | D24/23 |
| 10 . | A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TANEGUM ME/87 U2 | Crosspolimeri S.p.A. | PVC+PUR+Polyester | TANEGUM |
| UBESTA 3030 JFX1 | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| KEBAFORM® C 908 EL | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
| POLYfill PPC 200 E20 | Polykemi AB | PP Copolymer | POLYfill |
| POLYfill PPC K5040 E30 | Polykemi AB | PP Copolymer | POLYfill |
