AMPLIFY™ IO 3801 Datasheet,Ionomer,The Dow Chemical Company-SHANGHAI SUSHENG

Message
AMPLIFY™IO 3801 ethylene acrylic acid ionic bond polymer is used for blow molding and co-extrusion processing of cast films, and is used in soft packaging applications. When co-extruding with nylon and other films, this product can provide excellent sealing performance. for food packaging and special packaging Excellent sealant in blow molding and cast film co-extrusion processing Comply with the following regulations: U.S. Food and Drug Administration Regulation 21 CFR 177.1310 (B) EU, No 10/2011 Please check the regulations for complete details

General Information
Agency Ratings	FDA 21 CFR 177.1310 (b) Europe No 10/2011
Forms	Particle
Processing Method	Blow film Co-extrusion molding cast film

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.940	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.3	g/10 min	ASTM D1238
Ion Type	Sodium (Na)

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	51	µm
Tensile Strength ¹			ASTM D882
MD : Yield, 51 µm	15.2	MPa	ASTM D882
TD : Yield, 51 µm	12.5	MPa	ASTM D882
MD : Fracture, 51 µm	33.6	MPa	ASTM D882
TD : Fracture, 51 µm	34.3	MPa	ASTM D882
Tensile Elongation ²			ASTM D882
MD : Fracture, 51 µm	280	%	ASTM D882
TD : Fracture, 51 µm	400	%	ASTM D882
Elmendorf Tear Strength ³			ASTM D1922
MD : 51 µm	20	g	ASTM D1922
TD : 51 µm	42	g	ASTM D1922

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	93.0	°C	ASTM D1525
Melting Temperature (DSC)	95.0	°C	Internal method

Optical	Nominal Value	Unit	Test Method
Gloss ⁴(20°, 50.8 µm)	80		ASTM D2457
Haze ⁵(50.8 µm)	3.2	%	ASTM D1003

Extrusion instructions
吹塑薄膜的制造条件：用于处理此树脂的设备应由耐腐蚀材料制成。建议模具和适配器采用不锈钢和/或双面镀铬或镀镍。螺杆尺寸：A 和 B = 2.5 英寸 (64 mm)，C = 2 英寸 (51 mm)；30:1 L/D/尺寸螺杆类型：A = HS，B = DSBII，C = SFSM 模具间隙：70 密尔 (1.78 mm) 熔体温度：A 和 B = 420°F (216°C)，C = 470°F (243°C) 输出：模具周长的 10 磅/小时/英寸模具直径：8 英寸放大比：2.5:1 螺杆速度：45 rpm 冷冻线高度：30 分钟 (762 mm)

Extrusion instructions

吹塑薄膜的制造条件：用于处理此树脂的设备应由耐腐蚀材料制成。建议模具和适配器采用不锈钢和/或双面镀铬或镀镍。螺杆尺寸：A 和 B = 2.5 英寸 (64 mm)，C = 2 英寸 (51 mm)；30:1 L/D/尺寸螺杆类型：A = HS，B = DSBII，C = SFSM 模具间隙：70 密尔 (1.78 mm) 熔体温度：A 和 B = 420°F (216°C)，C = 470°F (243°C) 输出：模具周长的 10 磅/小时/英寸模具直径：8 英寸放大比：2.5:1 螺杆速度：45 rpm 冷冻线高度：30 分钟 (762 mm)

Note Message
1 .	Single-layer film data.
2 .	Single-layer film data.
3 .	Single-layer film data.
4 .	Single-layer film data.
5 .	Single-layer film data.

Category:	Ionomer , Functional Polymer
Manufacturer:	The Dow Chemical Company
Trademark:	AMPLIFY™ IO
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Po9EdW_AMPLIFY-IO-3801.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Unichem 7233	Colorite Polymers	PVC, Unspecified	Unichem
Generic Silicone	Generic	Silicone	Generic
KUBE PIR 22300	KUBE Electronics AG	HDPE	KUBE PIR
SIBUR Synthetic Rubber NBR 1865	SIBUR	NBR	SIBUR Synthetic Rubber
Sylvin 2900-80 Clear 8391	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin