Order Products : sales@su-jiao.com
WPP PE PE25-Black
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PnuRZO_WPP-PE-PE25-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WPP PE PE25-Black is a medium density polyethylene product,. It can be processed by blow molding or extrusion and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: automotive industry. The main characteristics are: heat stabilizer. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 0.90 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 15.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 450 | % | ASTM D638 |
| Flexural Modulus 3 | 350 | MPa | ASTM D790 |
| Additional Information |
|---|
| Tensile Elongation at Break, ASTM D638: >450% |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANTEC PC S75R GF30 | Polykemi AB | PC | SCANTEC |
| Novodur® H604 | Styrolution | ABS | Novodur® |
| INDURE™ X210A | LyondellBasell Industries | TPO (POE) | INDURE™ |
| TORZEN® HV360AHSL NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
| Sylvin 6034-85 Blue 8400 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
