Order Products : sales@su-jiao.com
DIAMALOY ABSPC 7801
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | DIAMALOY ABSPC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PgFUru_DIAMALOY-ABSPC-7801.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DIAMALOY ABSPC 7801 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in North America. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(265°C/5.0 kg) | 29 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 to 0.80 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 2 | 2320 | MPa | ASTM D638 |
| Tensile Strength 3(Yield) | 40.9 | MPa | ASTM D638 |
| Flexural Modulus - Tangent 4(3.18 mm) | 2020 | MPa | ASTM D790 |
| Flexural Strength 5(5.0% Strain, 3.18 mm) | 66.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 550 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed, 3.18 mm | 106 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm | 110 | °C | |
| Vicat Softening Temperature | 137 | °C | ASTM D1525 6 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 100 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Suggested Shot Size | 40 to 70 | % | |
| Suggested Max Regrind | 30 | % | |
| Rear Temperature | 230 to 260 | °C | |
| Middle Temperature | 235 to 265 | °C | |
| Front Temperature | 238 to 272 | °C | |
| Nozzle Temperature | 238 to 272 | °C | |
| Processing (Melt) Temp | 238 to 272 | °C | |
| Mold Temperature | 40.0 to 100 | °C | |
| Back Pressure | 0.345 to 1.03 | MPa |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 51 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 1.3 mm/min |
| 6 . | Rate B (120°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecnoprene® 3K3F NAT005 | SO.F.TER. SPA | PP Copolymer | Tecnoprene® |
| Catalyst CT/7 UV | Solvay Specialty Polymers | Polyolefin, Unspecified | Catalyst |
| Flontech® FT-GL25-8 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Huafon JF-P-9186 / JF-I-9422 | Huafon Group Co., Ltd. | PUR-Ester | Huafon |
| INEOS LLDPE LL6908AA | INEOS Olefins & Polymers Europe | LLDPE | INEOS LLDPE |
