Order Products : sales@su-jiao.com
ACCUTECH™ NY0730G10L
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | ACLO Compounders Inc. |
| Trademark: | ACCUTECH™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PcUBxf_ACCUTECH-NY0730G10L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ACCUTECH™ NY0730G10L is a Polyamide 6 (Nylon 6) product filled with 10% glass fiber. It is available in North America. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 6.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 118 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2900 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 93.0 | MPa | |
| Break | 80.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 5.0 | % | |
| Break | 10 | % | |
| Flexural Modulus | 3900 | MPa | ASTM D790 |
| Flexural Strength | 140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 120 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCUDIA® EVA PA-410 | REPSOL | EVA | ALCUDIA® EVA |
| DuraGrip® DGR 6160BK | Advanced Polymer Alloys | TPE | DuraGrip® |
| Grilamid® L 25H FWA black 9225 | EMS-GRIVORY | Nylon 12 | Grilamid® |
| LOTTMER HX-064AB | Lotte Chemical Corporation | TPE | LOTTMER |
| ARLEN™ E430N | Mitsui Chemicals, Inc. | Nylon 6T | ARLEN™ |
