Order Products : sales@su-jiao.com
Hyundai EP PA6 LS380
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | HYUNDAI EP Co., Ltd. |
| Trademark: | Hyundai EP PA6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Pas0yb_Hyundai-EP-PA6-LS380.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Hyundai EP PA6 LS380 is a Polyamide 6 (Nylon 6) product filled with 40% glass\mineral. It is available in Asia Pacific. Primary characteristic: heat stabilizer. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.48 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 0.20 to 0.40 | % | ASTM D955 |
| Ash Content | 40 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 147 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 7850 | MPa | ASTM D790 |
| Flexural Strength | 221 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 83 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 210 | °C | ASTM D648 |
| Melting Temperature | 220 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+13 to 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 3.5 | kV/mm | ASTM D149 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 8271-75 | ExxonMobil Chemical | TPV | Santoprene™ |
| RheTech Polypropylene HP531-01UV | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| Evatane® 18-150 | Arkema | EVA | Evatane® |
| Geon™ Vinyl Rigid Molding M3900 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
| Lifoflex® GA 1020 | Müller Kunststoffe GmbH | SEBS | Lifoflex® |
