Order Products : sales@su-jiao.com
EnCom F0 PC-ABS 2007
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | EnCom, Inc. |
| Trademark: | EnCom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PVH8wv_EnCom-F0-PC-ABS-2007.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FR PC-ABS Alloy |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 20 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 48.3 | MPa | ASTM D638 |
| Flexural Modulus | 2210 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 79.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 370 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 110 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.18 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 to 104 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 232 to 260 | °C | |
| Middle Temperature | 235 to 263 | °C | |
| Front Temperature | 241 to 274 | °C | |
| Nozzle Temperature | 246 to 274 | °C | |
| Processing (Melt) Temp | 246 to 274 | °C | |
| Mold Temperature | 79.4 to 93.3 | °C | |
| Back Pressure | 0.172 to 0.689 | MPa | |
| Screw Speed | 25 to 75 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LMP322 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| TUFNYL® SGF 15 9R BROWN | SRF Ltd. | Nylon 6 | TUFNYL® |
| ACRYPET® VR S40 | Mitsubishi Rayon Co., Ltd. | Acrylic (PMMA) | ACRYPET® |
| DuPure® SU 76 A | Ducor Petrochemicals BV | PP Impact Copolymer | DuPure® |
| LUBLENE GF30 NATURAL | LUBEN PLAST srl | PP, Unspecified | LUBLENE |
