Order Products : sales@su-jiao.com
AlphaSeal™ 388 D
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | AlphaGary |
| Trademark: | AlphaSeal™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PUtt5s_AlphaSeal-388-D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ALPHASEAL™ 388 D IS MADE FOR MOLDING OF FDA SACTIONED MATERIALS FOR FOOD CONTACT APPLICATIONS. IT IS RECOMMENDED AS A LINER FOR AROPP CLOSURES. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.908 to 0.948 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 32 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 87 to 93 | ||
| Shore A, 15 sec | 85 to 91 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(1.91 mm) | 4.14 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 1.91 mm) | 120 | % | ASTM D638 |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenopom® POM A3 LF PRTA010 PR315 | Petropol Industry and Trade of Polymers LTDA | Acetal (POM) Copolymer | Tenopom® POM |
| Favorite LL515 | Favorite Plastics | LDPE+LLDPE | Favorite |
| GAPEX® HT RNP23MU01BK | Ferro Corporation | Nylon+PP | GAPEX® HT |
| Epoxies, Ect. 10-3008 | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| Pibiter® NRV15S1 NAT001 | SO.F.TER. SPA | PBT | Pibiter® |
