Order Products : sales@su-jiao.com
Exxtral™ Performance Polyolefin CMW402
| Category: | TPO , Polypropylene, Compounded (TPO) |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Exxtral™ Performance Polyolefin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PTax4l_Exxtral-Performance-Polyolefin-CMW402.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A special thermoplastic polyolefin resin is used for parts under the hood of an automobile. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 18 | g/10 min | ISO 1133 |
| Melt Volume-Flow Rate (MVR) | 18.0 | cm³/10min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 27.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 4.0 | % | ISO 527-2/50 |
| Flexural Modulus - Secant | 3500 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Complete Break) | 5.0 | kJ/m² | ISO 179 |
| Notched Izod Impact (23°C, Complete Break) | 3.2 | kJ/m² | ISO 180/B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 65.0 | °C | ISO 75-2/A |
| Additional Information |
|---|
| Unless otherwise specified herein: data were prepared pursuant to ExxonMobil's sampling and testing procedures in effect at time of production; and applicable sampling and testing methods are available upon request. Values may result from interpolation or correlation of other data.Sampling and testing methods are subject to change without notice unless otherwise agreed in writing. |
| Legal statement |
|---|
| 本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用本产品不宜在与食品接触的应用中使用。 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marlex® HMN TR-938 | Chevron Phillips Chemical Company LLC | MDPE | Marlex® |
| Santoprene™ 8281-75MED | ExxonMobil Chemical | TPV | Santoprene™ |
| DIC.PPS FZ-3600-D5 | DIC Corporation | PPS | DIC.PPS |
| Formolene FORMAX® L91507A | Formosa Plastics Corporation, U.S.A. | LLDPE | Formolene FORMAX® |
| Rotuba CAP CP801 (8% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
