Order Products : sales@su-jiao.com
ICORENE® 3950S
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PS8UYS_ICORENE3950S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
General purpose linear low density polyethylene compound with part to part consistancy. Available as pellet or powder. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.937 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50) | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, Compression Molded) | 13 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 779 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength (-40°C, 3.18 mm, Rotational Molded) | 73 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 60.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Test data for natural, unpigmented resin. |
| Note Message | |
|---|---|
| 1 . | compression molded |
| 2 . | Type 4, 51mm/min |
| 3 . | Type 4, 51mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® C 246M NATURAL | Solvay Engineering Plastics | Nylon 6 | TECHNYL® C |
| ASI POLYPROPYLENE 3353-01 | A. Schulman Inc. | PP Impact Copolymer | ASI POLYPROPYLENE |
| Aropol™ MR 14027 | Ashland Performance Materials | Polyester, TS | Aropol™ |
| ISORENE™ FA9-1101 | SABIC Innovative Plastics Europe | TPE | ISORENE™ |
| LNP™ STAT-KON™ KEP33 compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ STAT-KON™ |
