TOPAS® 6017S-04 Datasheet,COC,Topas Advanced Polymers, Inc.-SHANGHAI SUSHENG

TOPAS® 6017S-04

Category:	COC , Cyclic Olefin Copolymer
Manufacturer:	Topas Advanced Polymers, Inc.
Trademark:	TOPAS®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PGOXVT_TOPAS-6017S-04.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Product Description TOPAS 6017S-04 is an injection molding grade with a high heat distortion temperature (170°C) and exceptional dimensional stability. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for precision optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has excellent heat resistance to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures. Selected Applications Drug delivery Precision componentry Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware High Temperature Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Dimensional stability, high tolerances Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6015S-04 - high heat distortion resistance (150°C) for 134°C protocols TOPAS IT X1 - impact grade for applications requiring extra toughness

Message

Product Description
TOPAS 6017S-04 is an injection molding grade with a high heat distortion temperature (170°C) and exceptional dimensional stability. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for precision optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has excellent heat resistance to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.

Selected Applications

Drug delivery

Precision componentry

Prefilled syringes, vials, cartridges

Bottles and tubes

Surgical instruments

IV containers and components

Labware

High Temperature Optics

Electronics

Food packaging

Healthcare and food contact

Leading Attributes

Low leachables & extractables, low water transmission

Dimensional stability, high tolerances

Non-ionic, does not promote adsorption like glass

Minimally reactive

Chemically resistant to alcohol, acetone, and acrylates

Transparent, withstands EtO/gamma/steam sterilization

Temperature resistance, clarity and purity

Clarity, low birefringence, low moisture sensitivity

Low dielectric constant, thermoplastic

Not manufactured with BPA, phthalates, or halogens

Broad regulatory compliance

Related Grades for Injection Molding, Healthcare, Optics and Diagnostics

TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM)

TOPAS 6015S-04 - high heat distortion resistance (150°C) for 134°C protocols

TOPAS IT X1 - impact grade for applications requiring extra toughness

General Information
Features	Good dimensional stability High purity Low extract Moisture proof Radiation disinfection Copolymer Ethylene oxide disinfection Good chemical resistance Alcohol resistance Heat resistance, high Definition, high thermal disinfection Compliance of Food Exposure BPA-free amorphous Halogen-free Disinfect with steam
Uses	Electrical/Electronic Applications Pipe fittings Optical applications Bottle Laboratory apparatus Food packaging Surgical instruments Drug packaging Medical/nursing supplies
Agency Ratings	DMF 12132 FDA FCN 405 ISO 10993 USP Class VI Europe 10/1/2011 12:00:00 AM
Appearance	Clear/transparent
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.02	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)	1.4	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)	1.50	cm³/10min	ISO 1133
Molding Shrinkage ¹	0.50 - 0.70	%	Internal method
Water Absorption (Saturation, 23°C)	0.010	%	ISO 62

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3000	MPa	ISO 527-2/1A/1
Tensile Stress (Yield)	58.0	MPa	ISO 527-2/1A/50
Tensile Strain (Yield)	2.4	%	ISO 527-2/1A/50

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	2.0	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	15	kJ/m²	ISO 179/1eU

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	170	°C	ISO 75-2/B
Glass Transition Temperature	178	°C	ISO 11357-2
Vicat Softening Temperature	178	°C	ISO 306/B50

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+16	ohms·cm	IEC 60093
Relative Permittivity			IEC 60250
1 kHz	2.35		IEC 60250
10 kHz	2.35		IEC 60250
Dissipation Factor (1.00 GHz)	7.0E-5		IEC 60250
Comparative Tracking Index	> 600	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.60 mm)	HB		UL 94

Optical	Nominal Value	Unit	Test Method
Refractive Index	1.530		ISO 489
Transmittance	91.0	%	ISO 13468-2

Injection	Nominal Value	Unit
Drying Temperature	60.0	°C
Drying Time	4.0 - 6.0	hr
Rear Temperature	250 - 280	°C
Middle Temperature	260 - 310	°C
Front Temperature	270 - 320	°C
Nozzle Temperature	260 - 320	°C
Processing (Melt) Temp	270 - 320	°C
Mold Temperature	120 - 160	°C
Injection Pressure	50.0 - 110	MPa
Injection Rate	Moderate-Fast
Holding Pressure	30.0 - 60.0	MPa
Back Pressure	< 15.2	MPa
Screw Speed	50 - 200	rpm

Injection instructions
Feed temperature: <110°C (<230°F)Max. residence time: <15 minutes; short interruptions to cycle >10 minutes, reduce Tx = 170°C (338°F)Injection speed: 50 - 150 mm/sec (2.0 - 6.0 in/sec)Nozzle type: Free flow

Note Message
1 .	Dependent on processing conditions and part design.

Resin Grade	Manufacturer	Category	Trademark
UBESTA XPA 9063 X1	UBE Engineering Plastics, S.A.	Nylon 12 Elast	UBESTA
Borealis FR4837	Borealis AG	PE, Unspecified	Borealis
EnCom M PBET2020	EnCom, Inc.	Polyester, TP	EnCom
HOPELEN SJ-170	Lotte Chemical Corporation	PP Homopolymer	HOPELEN
LNP™ LUBRICOMP™ RX03643H compound	SABIC Innovative Plastics	Nylon 66	LNP™ LUBRICOMP™

Resin Grade

Manufacturer