Order Products : sales@su-jiao.com
Braskem PE HD 7255 LS-L
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PFRkoG_Braskem-PE-HD-7255-LS-L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HD7255LS-L is a high-density polyethylene, developed for the injection molding with good tenacity and impact properties combined with a good stiffness. It presents a radio between melt flow and density that provides excellent mechanical properties. This resin has additives against the action of ultraviolet radiation. Application: Bins, Boxes for fruits and vegetables, Boxes for fish, general purpose boxes and caps and closures for general use. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.954 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 2.00 mm, 100% Igepal, Compression Molded, F50) | < 5.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 27.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1270 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 45 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 74.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 127 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL NY66-G13-(color)H | Polymer Resources Ltd. | Nylon 66 | PRL |
| Resalloy™ 285 | Resirene, S.A. de C.V. | Styrene Epoxy Copolymer | Resalloy™ |
| KEBABLEND®-W/H 23.10.1 PBT | BARLOG plastics GmbH | PBT | KEBABLEND®-W/H |
| MAJORIS ET370 | AD majoris | PP, Unspecified | MAJORIS |
| MAJORIS POM GRIS 8109 | AD majoris | Acetal (POM) Homopolymer | MAJORIS |
