Order Products : sales@su-jiao.com
CERTENE™ LLBI-5526
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PEAd2P_CERTENE-LLBI-5526.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLBI-5526 is a certified prime grade, containing Butene-ethylene copolymer designed for High-Flow INJECTION MOLDING of thin-walled high quality applications. LLBI-5526 features superior processability over a wide range of molding conditions, fast cycle times, very good rigidity, high gloss surface, low temperature toughness, and warpage free moldings. LLBI-5526 applications include housewares, margarine tubs, small to medium containers, trash cans, toys, and multicavity lids, closures and caps, where excellent toughness, good impact strength and high gloss are required. Recommended processing temperature is 170 to 210°C., with mold at 20 to 40°C. LLBI-5526 complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 55 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 1.75 mm, 100% Igepal, F50) | 5.00 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 13.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 100 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4 | 517 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 52.5 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525 |
| Additional Information |
|---|
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 - 210 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Notched bent strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE B5309 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| Sylvin 7868-75C Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Duratel MF9-GF10 | Custom Resins Group | Acetal (POM) Copolymer | Duratel |
| HIVAL® HG6 Black | Nexeo Solutions, LLC. | ABS | HIVAL® |
| Lustran® Elite 1891 | Styrolution | ABS | Lustran® Elite |
