Order Products : sales@su-jiao.com
Borcoat™ HE3450-H
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borcoat™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PC7zvG_Borcoat-HE3450-H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Borcoat HE3450-H is a bimodal, high density polyethylene compound and is coloured black Borcoat HE3450-H contains finely dispersed carbon black that helps to impart excellent weathering properties. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | ISO 1183 | ||
| -- 1 | 0.961 | g/cm³ | ISO 1183 |
| -- 2 | 0.951 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 0.70 | g/10 min | ISO 1133 |
| 190°C/5.0 kg | 2.9 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (10% Igepal) | > 5000 | hr | ASTM D1693A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 62 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | > 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 600 | % | ASTM D1708 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 124 | °C | ISO 306/A50 |
| Melting Temperature (DSC) | 129 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 10 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 30 | kV/mm | IEC 60243-1 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 - 210 | °C | |
| Cylinder Zone 2 Temp. | 190 - 210 | °C | |
| Cylinder Zone 3 Temp. | 190 - 210 | °C | |
| Cylinder Zone 4 Temp. | 190 - 210 | °C | |
| Cylinder Zone 5 Temp. | 190 - 210 | °C | |
| Melt Temperature | 200 - 230 | °C | |
| Die Temperature | 190 - 210 | °C |
| Extrusion instructions |
|---|
| Head Temperature: 190 to 210°C |
| Note Message | |
|---|---|
| 1 . | Compound |
| 2 . | Base Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ShinkoLite-P UT-100 | Mitsubishi Rayon America Inc. | Acrylic (PMMA) | ShinkoLite-P |
| AMTOPP HM30 | Inteplast Group | PP, Unspecified | AMTOPP |
| POLYabs HF0 | Polykemi AB | ABS | POLYabs |
| LEXAN™ EXL9330 resin | SABIC Innovative Plastics | PC | LEXAN™ |
| LEXAN™ 920A resin | SABIC Innovative Plastics | PC | LEXAN™ |
