Order Products : sales@su-jiao.com

Sasol Polymers PE HF150

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Sasol Polymers
Trademark:	Sasol Polymers PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PAvmSO_Sasol-Polymers-PE-HF150.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Features

Hexene copolymer

Good mechanical properties

Excellent drawdown

Good heat sealing range

Good opticals

Film stiffness

Applications

Lamination film

Liquid packaging film (FFS)

General Information
Additive	Low smoothness Antioxidation Moderate caking resistance
Features	Low smoothness Copolymer Optical hexene comonomer Antioxidation Good stripping Good heat sealability Compliance of Food Exposure Moderate caking resistance
Uses	Packaging Films Laminate
Agency Ratings	EC 1935/2004 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(c) 3.1a
Forms	Particle
Processing Method	Blow film

Physical	Nominal Value	Unit	Test Method
Density	0.925	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	30	µm
Tensile Strength			ASTM D882
MD : Yield, 30 µm, blown film	12.0	MPa	ASTM D882
TD : Yield, 30 µm, blown film	12.0	MPa	ASTM D882
MD : Broken, 30 µm, blown film	32.0	MPa	ASTM D882
TD : Broken, 30 µm, blown film	26.0	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Yield, 30 µm, blown film	370	%	ASTM D882
TD : Yield, 30 µm, blown film	510	%	ASTM D882
Dart Drop Impact ¹(30 µm, Blown Film)	130	g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD : 30 µm, blown film	3.0	g	ASTM D1922
TD : 30 µm, blown film	25	g	ASTM D1922

Optical	Nominal Value	Unit	Test Method
Gloss (45°)	67		ASTM D2457
Haze	7.0	%	ASTM D1003

Additional Information
The above values were calculated from data for 30µm film produced on a 75mm Barmag extruder with 190°C melt temperature using a 2:1 blow ratio.

Extrusion	Nominal Value	Unit
Hopper Temperature	180 - 190	°C
Cylinder Zone 1 Temp.	190 - 200	°C
Cylinder Zone 2 Temp.	190 - 200	°C
Cylinder Zone 3 Temp.	190 - 200	°C
Cylinder Zone 4 Temp.	190 - 200	°C
Melt Temperature	190	°C
Die Temperature	190 - 200	°C

Extrusion instructions
Screen Pack: 20/40/20 BS meshBlow ratio: >2:1

Note Message
1 .	F50

Resin Grade	Manufacturer	Category	Trademark
RheTech Polypropylene GC20P105-08FA	RheTech, Inc.	PP, Unspecified	RheTech Polypropylene
Roscom PVC 201FLR-85 Natural	Roscom, Inc.	PVC, Flexible	Roscom PVC
ADDILENE J 220 M20	ADDIPLAST	PP Copolymer	ADDILENE
Ferro PP LPP20BN34HB	Ferro Corporation	PP, Unspecified	Ferro PP
Flexalloy® OR 9800-50	Teknor Apex Company	PVC Elastomer	Flexalloy®