Order Products : sales@su-jiao.com
MAJORIS DT157X - 8106
| Category: | PP, High Crystal , High Crystallinity Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PA5pvF_MAJORIS-DT157X---8106.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MAJORIS DT157X - 8106 is a high performance reinforced polypropylene high crystallinity compound intended for injection moulding. The product is available in natural, but other colours can be provided on request. MAJORIS DT157X - 8106 has been developed especially for demanding automotive applications and various engineering sectors. MAJORIS DT157X - 8106 has high rigidity, good dimensional stability, very good stiffness and UV stabilised. APPLICATIONS Product requiring high overall mechanical performance such as:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.01 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ISO 1133 |
| Molding Shrinkage (2.00 mm) | 1.3 - 1.7 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 42.0 | MPa | ISO 527-2/50 |
| Flexural Modulus | 2800 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 2.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 149 | °C | ISO 75-2/B |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 750 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 220 - 260 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUSTATRON PPS GF 40 | Röchling Sustaplast SE & Co. KG | PPS | SUSTATRON |
| WACKER® PRIMER G 718 | Wacker Chemie AG | Silicone | WACKER® |
| 4MID® 9B24302 | 4Plas | Nylon 6 | 4MID® |
| Infino HI-1001BP | SAMSUNG SDI CO., LTD. | PC+ABS | Infino |
| POFEX 8200EP80V | POLYROCKS CHEMICAL CO., LTD | TPE | POFEX |
