Eltex® PF6160AP

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	P9CDNh_Eltex-PF6160AP.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Non stabilised Linear Low density polyethylene flake (free flowing powder). Benefits & Features ELTEX ® PF6160AP is a non stabilised Linear Low density polyethylene flake (free flowing powder) grade manufactured by Ineos Olefins and Polymers Europe containing hexene-1 as the comonomer produced with a metallocene catalyst. 5 to 20 % of ELTEX ® PF6160AP powder can be used in combination with LLDPE and LDPE pellets as absorber of X-linking agent of Low Voltage Silane Crosslinked insulation. In addition ELTEX ® PF6160AP can be used at a level of 100 % for low voltage silane crosslinked insulation by adding 0.7 -0.9 % of vinyl trimethoxysilane, a suitable peroxide and a crosslinking catalyst. Commercial mixtures can be used for this purpose. The absorption level and the absorption conditions will depend on the nature of the liquid to be dispersed. In most of the cases, a 10 % in weight of liquid can be easily absorbed in ELTEX ® PF6160AP. Good level of porosity which induces a good liquid X-linking agents absorption (silane, peroxide…) Higher X-linking efficiency with a good X-linking agent dispersion to the benefit of lower X-linking agent content Suitable melt index and density for easy dispersion in most of polyethylenes Excellent flake morphology with high diameter and low fines content: free flowing powder induces a good extruder feeding and a good dispersion in the barrel Higher output and productivity High bulk density to the benefit of easy handling and transfer of the powder Applications ELTEX ® PF6160AP represents an interesting balance of properties for applications as liquids carrier in reactive processing. Carrier for color concentrates, master-batches Crosslinked Wire & Cable insulation Textile coating Hot & Cold PEX Pipe

Message

Non stabilised Linear Low density polyethylene flake (free flowing powder).

Benefits & Features
ELTEX ® PF6160AP is a non stabilised Linear Low density polyethylene flake (free flowing powder) grade manufactured by Ineos Olefins and Polymers Europe containing hexene-1 as the comonomer produced with a metallocene catalyst.
5 to 20 % of ELTEX ® PF6160AP powder can be used in combination with LLDPE and LDPE pellets as absorber of X-linking agent of Low Voltage Silane Crosslinked insulation.
In addition ELTEX ® PF6160AP can be used at a level of 100 % for low voltage silane crosslinked insulation by adding 0.7 -0.9 % of vinyl trimethoxysilane, a suitable peroxide and a crosslinking catalyst. Commercial mixtures can be used for this purpose.
The absorption level and the absorption conditions will depend on the nature of the liquid to be dispersed. In most of the cases, a 10 % in weight of liquid can be easily absorbed in ELTEX ® PF6160AP.

Good level of porosity which induces a good liquid X-linking agents absorption (silane, peroxide…)

Higher X-linking efficiency with a good X-linking agent dispersion to the benefit of lower X-linking agent content

Suitable melt index and density for easy dispersion in most of polyethylenes

Excellent flake morphology with high diameter and low fines content: free flowing powder induces a good extruder feeding and a good dispersion in the barrel

Higher output and productivity

High bulk density to the benefit of easy handling and transfer of the powder

Applications
ELTEX ® PF6160AP represents an interesting balance of properties for applications as liquids carrier in reactive processing.

Carrier for color concentrates, master-batches

Crosslinked Wire & Cable insulation

Textile coating

Hot & Cold PEX Pipe

General Information
Features	Copolymer Hexene Comonomer
Uses	Insulation Masterbatch Textile Applications Wire & Cable Applications
Forms	Flakes Powder

Physical	Nominal Value	Unit	Test Method
Density ¹	0.916	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	5.5	g/10 min	ISO 1133

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	103 to 116	°C	ISO 11357-3

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+16	ohms·cm	ASTM D257
Dielectric Constant (50 Hz)	2.20		ASTM D150
Dissipation Factor (50 Hz)	< 3.0E-3		ASTM D150

Note Message
1 .	Conditioning ISO 1872/1

Resin Grade	Manufacturer	Category	Trademark
MAXAMID™ RC66-BK09	Pier One Polymers, Inc.	Nylon 66	MAXAMID™
RTP 203A UV	RTP Company	Nylon 6	RTP
PrimePart® ST PEBA 2301	EOS GmbH	TPA-ET	PrimePart®
Vyncolit® X640	Vyncolit N.V.	Phenolic	Vyncolit®
Axiall PVC 8843	Axiall Corporation	PVC, Flexible	Axiall PVC