Sarlink® TPE ME-2380-01 BLK 111 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Sarlink ME-2380-01 BLK 111 is a high performance thermoplastic elastomer designed for automotive exterior molded applications. Sarlink ME-2380-01 BLK 111 is a medium hardness, low density, UV stabilized grade delivering excellent aesthetics and good injection molding cycle times.

General Information
Features	Low Specific Gravity Low density Good UV resistance Workability, good Good adhesion Good chemical resistance Excellent appearance Elastic Medium hardness
Uses	Handle Weather-resistant sealing strip Application in Automobile Field Automotive exterior parts Car exterior decoration Rubber substitution
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.898	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	20	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A, 1 sec	83	ASTM D2240
Shaw A, 5 seconds	80	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D412
Transverse flow : Fracture	12.7	MPa	ASTM D412
Flow : Fracture	6.69	MPa	ASTM D412
Tensile Elongation			ASTM D412
Transverse flow : Fracture	850	%	ASTM D412
Flow : Fracture	640	%	ASTM D412
Tear Strength - Across Flow	38.5	kN/m	ASTM D624
Compression Set			ASTM D395
23°C, 22 hr	31	%	ASTM D395
70°C, 257 hr	46	%	ASTM D395
125°C, 70 hr	87	%	ASTM D395

Additional Information
Fogging, 3 Hrs @ 100C, 21C Plate = 96%

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	199 - 210	°C
Middle Temperature	204 - 216	°C
Front Temperature	210 - 221	°C
Nozzle Temperature	216 - 227	°C
Processing (Melt) Temp	216 - 227	°C
Mold Temperature	35 - 66	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 120	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	193 - 204	°C
Cylinder Zone 2 Temp.	199 - 210	°C
Cylinder Zone 3 Temp.	204 - 216	°C
Cylinder Zone 4 Temp.	204 - 216	°C
Cylinder Zone 5 Temp.	210 - 221	°C
Die Temperature	216 - 227	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	P80n4N_SarlinkTPEME238001BLK111.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
megol® TA 50 AM	API SpA	SEBS	megol®
ENFLEX V1055A	ENPLAST Americas, a Ravago Group Company	TPV	ENFLEX
Globalprene® 3411	Lee Chang Yung Chemical Industry Corp.	SBS	Globalprene®
ICORENE® N2803	ICO Polymers EMEA, A Division of A. Schulman	HDPE	ICORENE®
Pearlthane® D91T86	Lubrizol Advanced Materials, Inc.	TPU, Unspecified	Pearlthane®