Order Products : sales@su-jiao.com
THERMORUN® Z102B
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | THERMORUN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | P6PAEG_THERMORUN-Z102B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| THERMORUN®Z102B is a thermoplastic elastomer (TPE) material,. This product is available in North America, Europe or Asia Pacific,. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.880 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 | g/10 min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction | 1.3 | % | ISO 294-4 |
| Flow direction | 1.5 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 45 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 180 | MPa | ISO 178 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| Yield | 6.00 | MPa | ISO 37 |
| Fracture | 11.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 710 | % | ISO 37 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-40°C) | No Break | ISO 180 |
| Additional Information |
|---|
| Data obtained using JIS test methods. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® HDB 501 | Marco Polo International, Inc. | HDPE | MARPOL® |
| Shinko-Lac® ASA S359 | Mitsubishi Rayon America Inc. | ASA | Shinko-Lac® |
| Vibrathane® B844 | Chemtura | PUR-Ether/TDI | Vibrathane® |
| Evolue™ SP0540 | Prime Polymer Co., Ltd. | LLDPE | Evolue™ |
| Grilamid® XE 3997 nat | EMS-GRIVORY | Nylon 12 | Grilamid® |
