Tecnoflon® VPL 45535

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	P53L2Z_Tecnoflon-VPL-45535.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Tecnoflon® VPL 45535 is a brand new generation very low temperature peroxide curable fluoroelastomer with outstanding low temperature flexibility (TR10 = -35°C). Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles. Some of the basic properties of Tecnoflon® VPL 45535 are: Outstanding low temperature flexibility Excellent chemical resistance, especially in alcohol containing fuels Low post cure Superior mold flow Lack of mold fouling Excellent mold release Tecnoflon® VPL 45535 can be used for compression, injection, injection-compression and transfer molding of O-rings, gaskets and seals. Tecnoflon® VPL 45535 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.

Message

Tecnoflon® VPL 45535 is a brand new generation very low temperature peroxide curable fluoroelastomer with outstanding low temperature flexibility (TR10 = -35°C). Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles.

Some of the basic properties of Tecnoflon® VPL 45535 are:

Outstanding low temperature flexibility

Excellent chemical resistance, especially in alcohol containing fuels

Low post cure

Superior mold flow

Lack of mold fouling

Excellent mold release

Tecnoflon® VPL 45535 can be used for compression, injection, injection-compression and transfer molding of O-rings, gaskets and seals.
Tecnoflon® VPL 45535 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.

General Information
Features	Alcohol Resistant Fuel Resistant Good Chemical Resistance Good Flow Good Mold Release Good Processability Low Temperature Flexibility
Uses	Belts/Belt Repair Blending Gaskets Hose Low Temperature Applications Profiles Seals Sheet
Appearance	Translucent
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	25	MU
Fluorine Content ²	65	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Trexprene® A64BW-HF	Mitsubishi Chemical Performance Polymers, Inc.	TPV	Trexprene®
KIBITON® TPE PB-511	CHI MEI CORPORATION	TPE	KIBITON® TPE
IPC PP 4820H-T	International Polymers Corporation	PP Homopolymer	IPC PP
LNP™ VERTON™ RV00CESS compound	SABIC Innovative Plastics	Nylon 66	LNP™ VERTON™
MAJORIS BGR310 - 8229	AD majoris	PP, Unspecified	MAJORIS