Order Products : sales@su-jiao.com
Polyfast SA001
| Category: | ASA , Acrylonitrile Styrene Acrylate |
| Manufacturer: | Ravago Group |
| Trademark: | Polyfast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | P4UP9e_Polyfast-SA001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ASA general purpose grade |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.06 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 10 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.40 to 0.70 | % | ISO 2577 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 42.0 | MPa | |
| Break | 35.0 | MPa | |
| Tensile Strain (Break) | 10 | % | ISO 527-2 |
| Flexural Modulus | 2700 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 10 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Annealed) | 88.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 103 | °C | ISO 306/A50 |
| -- | 96.0 | °C | ISO 306/B50 |
| Ball Pressure Test (75°C) | Pass |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+13 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+12 | ohms·cm | IEC 60093 |
| Electric Strength (1.00 mm, in Oil) | 38 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating 1 | Internal Method | ||
| 1.60 mm | HB | ||
| 3.20 mm | HB | ||
| Glow Wire Flammability Index (2.00 mm) | 650 | °C | IEC 60695-2-12 |
| Note Message | |
|---|---|
| 1 . | UL94 internally tested |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEPAZ™ K435CTS | Mando Advanced Materials Co., Ltd. | PPS | SEPAZ™ |
| TANEGUM ME/85 U2 SA | Crosspolimeri S.p.A. | PUR, Unspecified | TANEGUM |
| Ultraform® N 2640 E4 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| DURACON® OL-10 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer | DURACON® |
| Epolene® N-14P | Westlake Chemical Corporation | LDPE | Epolene® |
