Order Products : sales@su-jiao.com
Ebalta GM 714 / PUR 4
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Ebalta Kunststoff GmbH |
| Trademark: | Ebalta |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | P3vQe1_Ebalta-GM-714-PUR-4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ebalta GM 714 is a slow-curing versatile 2-components polyurethane casting compound. It's wear resistant, shows low shrinkage and for this reason it's very suitable for sheet metal forming moulds and big volume moulds for solid casting. Applications
Properties
|
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Shore Hardness (Shore D) | 85 to 91 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 6080 to 6420 | MPa | ISO 178 |
| Flexural Stress | 55.0 to 65.0 | MPa | ISO 178 |
| Compressive Stress | 58.0 to 68.0 | MPa | ISO 604 |
| Taber Abrasion Resistance (500 Cycles, 1000 g, CS-17 Wheel) | 41.0 | mg | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 4.7 to 5.9 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Martens Temperature | 33 to 43 | °C | DIN 53458 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 15 | ||
| Resin | Mix Ratio by Weight: 100 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (20°C) | 2.05 to 2.15 | g/cm³ | |
| Viscosity (25°C) | 5.0 to 6.0 | Pa·s | |
| Curing Time (20°C) | 12 to 18 | hr | |
| Pot Life 1(20°C) | 40 to 45 | min |
| Note Message | |
|---|---|
| 1 . | 200 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® LDPE 2200H2 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
| Bayflex® 110-50 (24% Mineral) | Covestro - PUR | PUR-Ether/MDI | Bayflex® |
| ALCOM® PC 740/4 UV WT1240-10LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| ENVIRON® ENV39-NC420 | ENVIROPLAS®, Inc. | PC+PBT | ENVIRON® |
| Plaslube® ABS/PBT GF30 BK | Techmer Engineered Solutions | ABS+PBT | Plaslube® |
