Order Products : sales@su-jiao.com
WPP PP PPC4CF3.2-Black
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | P1Ak58_WPP-PP-PPC4CF3-2-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Properties shown below for this filled blend are typical for a 32% calcium filled polypropylene. This basic product satisfies many application needs. Special compounds are available. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 14.0 | MPa | ASTM D638 |
| Flexural Modulus 2 | 1200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Multi-Axial Instrumented Impact Energy | ASTM D3763 | ||
| -15°C | 20.0 | J | ASTM D3763 |
| 23°C | 18.0 | J | ASTM D3763 |
| Additional Information |
|---|
| Tested at 23 ± 2°C (73.4 ± 3.6°F) and 50 ± 5% relative humidity unless otherwise noted.Filler Content, In-house #1003-02: 32% |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MOSTEN GB 504 | UNIPETROL RPA | PP Copolymer | MOSTEN |
| ABSCOM® FT3450 | Polymer Compounders Limited | ABS | ABSCOM® |
| ELASTOSIL® AUX BATCH PT 1 | Wacker Chemie AG | Silicone | ELASTOSIL® AUX |
| ENGAGE™ 8457 DA | The Dow Chemical Company | TPO (POE) | ENGAGE™ |
| Latimass 53-04 D009 | LATI S.p.A. | PP Homopolymer | Latimass |
